docker for mac won't start after sign out

#Docker for mac won't start after sign out how to#
#Docker for mac won't start after sign out zip file#
#Docker for mac won't start after sign out software#
#Docker for mac won't start after sign out download#

To do this we need to find out the IP address of your Raspberry Pi first. To check if Docker is actually running we need to log into the Raspberry Pi. The very first boot will take one to three minutes as the file system will be resized.

putting the SD card into the designated slotĪfter finishing the last step your Raspberry Pi will boot and the LEDs should start blinking.

connecting the Raspberry Pi to your local network via an ethernet cable.

When the dd is finished, you should get an output like this:įinally unmount the SD card again in the same way as before. While this command is executed you won’t get any information about its progress.ĭepending on your hardware and the performance of your SD card it can take up to five minutes to flash the image. Sudo dd if=hypriotos-rpi-201?.img of=/dev/rdisk5 bs=1m Make sure you put a r in front of disk as you can see in the example

replace the parameter after of= with the identifier of your SD card.

replace the parameter after if= with the path to the downloaded image.

We are going to use the dd command for this.īefore you execute the command below, make sure to Make sure to replace /dev/disk5 with the identifier of your sd card. One item in the list should have a size that is very close to the size of your SD card.įrom there get the identifier which is shown in the first column.

Look at the fourth column which shows the size of the devices of your workstation. You should see a list of all your disks like this:

Flash the downloaded image to your SD cardįirst put your SD card into the computer. In the next step we will flash this file onto your SD card.

#Docker for mac won't start after sign out zip file#

Now extract the zip file with unzip hypriotos-rpi-201?.img.zipĪfter the file is unzipped you will have a new file with an.

#Docker for mac won't start after sign out download#

Go to your Download folder first by typing cd ~/Downloads Now we will extract the downloaded zip file. To do this press CMD + Whitespace and type terminal. Download the Hypriot Docker SD card imageĭownload our latest SD card image from the download page.Īfter the download is completed open a terminal window. Transferring an image to an SD card is often referred to as flashing.Īfterwards you just have to insert the flashed SD card into your Raspberry Pi and start it up. To use the image you first have to download and transfer it to your SD card. We - from Hypriot - created a preconfigured SD card image which contains everything you need to run Docker on your Raspberry Pi.

#Docker for mac won't start after sign out software#

In our case the software we wanna use is Docker. With software we basically mean two things: first an operating system for your Raspberry Pi and second the software you as user would like to use - e.g. The SD card contains all the software which we are going to use on our Raspberry Pi. If you are going to use a Raspberry 2 you will have to use a microSD card - otherwise a normal SD card is sufficient. The hardware you gonna need to follow along is a Raspberry Pi 1 or 2 and one SD card. If you don’t you can learn the basics in An Introduction to the Linux Terminal and come back afterwards. Make sure that you know the basics about the command line and you should be ready to go. We tried to make this guide as concise as possible. If you have not read the getting started guide about Docker on the Raspberry Pi yet you might wanna check it out first: Getting started with Docker on your ARM Device

#Docker for mac won't start after sign out how to#

This guide shows you how to get Docker running on your Raspberry Pi using a Mac OS X workstation. How to get Docker running on your Raspberry Pi using Mac OS X